Canon i-SENSYS MF8360Cdn Printer Driver. The main criterion for the selection was, in addition to print / scan quality, the capacity of the document feeder, idle power consumption, and compatibility with the Mac OS X. Unfortunately, not only did the latter prove to be a disaster. Until today (two months after Lion publication) there is still no fully functional driver. The half-hard working driver V2.03 must be found in the unclear support page, I found it on the Canadian Canon website! Furthermore, the device has several bugs, for example, when scanning more than 50 pages to be inserted and to be scanned on USB stick there is somewhere “okay” but you check the file are only the first 50 scanned, the Rest is missing without any reference, okay, the ADF is specified for 50 pages, but who counts before scanning the pages?
Canon i-SENSYS MF8360Cdn Driver Download
The one not even the scan parameters for the scan to USB-adjust can fit as only in the picture. Since also the network scanning on the Mac is not supported (ATTENTION, this is hidden in the whole documents only in a footnote) is with me but the scan over USB stick became very important. The coronation is then the support, in addition to long reaction times come only standard flaps or the actual question is not even considered. In my experience: quite bad! My next printer is again a Brother, since I had at least no problems with the last device and the driver support is around worlds better.